• Multifunctional molecular-assemblies and hybrid organic - inorganic materials are examined from the viewpoint of structural freedom of organic molecules. The spin and electronic states of molecular-assemblies are designed in terms of electrical conductivity, magnetism, and ferroelectricity. Diverse molecular assemblies from single crystal, plastic crystal, liquid crystal, gel, to Langmuir-Blodgett film are our research targets, which were hybridized with inorganic gigantic clusters and metal nanoparticles. We are prepared to provide academic consultations to companies interested in our research.

• The high-temperature strength in Co-based alloys is inferior to that in Ni-based superalloys due to no available ’ phase for strengthening Co-based alloys. We have found a new intermetallic compound Co3(Al,W) ’ phase, and /’ Co-Al-W-based wrought and cast alloys show excellent high-temperature strength. The /’ Ir-Al-W-based alloys are also available for high-temperature uses at over 1100 °C. The Co-based alloys also have good wear resistance. For example, friction stir welding (FSW) of high-softening-temperature materials such as steels and titanium alloys is possible using a Co-based alloy tool. We hope to conduct collaborative research with willing company for a practical application of the Co- or Ir-based alloys for high-temperature uses including FSW applications.

• Since we have developed the techniques (ion control plasma) to generate and control ions, electrons, reactive species (radicals) in the low temperature non-equilibrium plasmas which I can touch by hand, the composite materials using nanoparticles, nanocarbons, biological molecules are synthesized in the nano-electronics field, the minimally-invasive and highly-efficient drug/gene transfection systems are developed in the medical field, and bacteria and insects are killed by the plasma in place of pesticide in the agricultural field.

The ion-controlled plasmas are applied for the minimally-invasive gene transfection system, next-generation agricultural system, the electrode material of highly-efficient battery, and so on. We hope to conduct the collaborative research with a willing company for a practical application of the novel plasma nano-medical-agricultural applied technology in industry.

• One of the important challenges in the development of carbon nanotubes (CNTs) reinforced ceramic composites is uniform dispersion of CNTs in the matrix. The mechanical properties of CNT/ceramics composites have been limited to date due to the formation of CNT agglomerates in the composite. We have successfully produced CNT/alumina composites with world top class strength and toughness, by employing a newly developed CNTs dispersion technique based on a flocculation method. The processing method developed in this study enables us to prepare high performance CNT materials using a pressureless sintering method.

The possible applications of the CNT/alumina composites developed in this study include tribological materials (ball bearing), biomaterials (artificial hip joint), micro-actuator materials utilizing electrostrictive effects, electromagnetic wave absorber, particularly in the frequency range of several GHz and several ten GHz.

• We successfully realized millisecond-order X-ray phase tomography using a fringe-scanning method in grating-based X-ray interferometry. We obtained phase tomograms with a measurement time of 4.43 ms using a white synchrotron X-ray beam. The use of a fringe-scanning method enables us to achieve not only a higher spatial resolution but also a higher signal-to-noise ratio than that attained by the Fourier transform method. In addition, our approach can be applied to realize four-dimensional or high-throughput X-ray tomography for samples that can be rotated at a high speed.

• General metallic biomaterials, such as stainless steels and conventional CoCr alloys, show a high Young's modulus ten times higher than that of human bones. This is an unfavored feature because it causes the so-called "stress shielding effect" when they are used as implants. β-type Ti alloys have a relatively lower Young's modulus, but they come with a compromise of low wear resistance. The current novel CoCr-based alloys are a breakthrough; they exhibit both a low Young's modulus similar to human bones and a high wear and corrosion resistance. Moreover, they exhibit superelasticity with a huge recoverable strain over 17%, also showing promise as shape memory alloys.

It is the first time that a low Young's modulus, a high corrosion and wear resistance, and a superior superelastic behavior are simultaneously obtained in a single material. The current novel CoCr-based alloys are promising for biomedical applications such as total hip or knee joint replacements, bone plates, spinal fixation devices, and vascular stents.