"O" Keywords - 52 Result(s)

 O

[Obesity]

Development of New Drugs and Devices Regulating Inter-Organ Neural Network for Obesity Therapy

NEXT
PREV
特徴・独自性
  • Obesity induced the metabolic syndrome, which causes cardiovascular diseases. Obesity has now become a major health concern not only in developed countries but developing countries. However, diet and exercise are still major therapies. We discovered endogenous systems maintaining homeostasis of energy metabolism and revealed several neuronal networks among organs to be responsible for the regulation systems.
  • 1) Afferent neuronal signals from adipose tissue regulate appetite and prevent over-eating during obesity development (Cell Metab 2006)
  • 2) Neuronal network from the liver enhances basal metabolic rates to prevent obesity development when energy store is increasing (Science 2006) 3) Neuronal network from the liver suppresses adaptive thermogenesis in brown adipose tissue (Cell Metab 2012).
実用化イメージ

On the basis of these original discoveries, we are aiming at developing new drugs and/or building devices which regulate the inter-organ neuronal networks and hope to conduct collaborative research with a willing company for a practical application to obesity therapy.

Researchers

Graduate School of Medicine

Hideki Katagiri

[Object Tracking]

High-Speed Vision for Real-Time Motion Analysis

NEXT
PREV
特徴・独自性
  • We are investigating high-speed vision systems that enable real-time image acquisition and visual processing at frame rates substantially higher than the standard video rate.
実用化イメージ

High-speed vision systems are useful for fast measurement and control of dynamic systems in general. When combined with external facilities such as high-speed projectors or acceleration sensors, they enable further wider applications including fast 3D measurement or object identification.

Researchers

Graduate School of Information Sciences

Shingo Kagami

[Occlusal accuracy]

High-Precision Capturing of 3-D Dental-Arch Shapes and Their Occlusal Relation and its Potential Implementation into CAD/CAM Dentistry

NEXT
PREV
特徴・独自性
  • In spite of the long history of digital dentistry, the accuracy of the prosthetics fabricated with CAD/CAM systems is far from satisfactory. Jaw opening during taking impression elicits deformation of the mandible and the lower dental arch, and consequently causes the inaccuracy of occlusal relationship of the upper and lower dental arches on the CAD data. The method presented here utilizes the check-bite record at the maximum intercuspation to correct the relative positions among the teeth in the dental arches as well as between the arches. After this correction, the accuracy of the CAD data is satisfactory enough for the fabrication of the dental prosthetics which need no adjustment during their setting.
実用化イメージ

This method uses the newly-developed check-bite recording technique together with the conventional precious impression or optical impression techniques. It can easily be applied to the commercial CAD/CAM systems in the market. We hope to collaborate to the manufacturers of dental CAD/CAM systems to increase the accuracy of the systems.

Researchers

Graduate School of Dentistry

Yoshinori Hattori

[Octane number]

Identification of Ignition and Combustion Characteristics by a Micro Flow Rector with a Temperature Gradient

NEXT
PREV
特徴・独自性
  • We have developed a methodology for identifying general ignition and combustion characteristics of gaseous and liquid fuels including bio and synthetic fuels. It enables identification of ignition and combustion characteristics of new fuels prior to application for practical combustion devices. The reactor system consists of a small diameter channel which has a temperature gradient from room temperature to the auto ignition temperature and thus reaction characteristics in different temperature levels can be easily investigated. Such a measurement had required research level skills and special devices such as rapid compression machine or shock tube which is costly in general, however, the micro flow reactor with temperature gradient enables reaction analysis easily.
実用化イメージ

It is expected to contribute to the designing of combustion devices, developments of new fuels, and chemical promoter and inhibitor.

Researchers

Institute of Fluid Science

Kaoru Maruta

[ocular neovascular disease]

Regulation of Angiogenesis

NEXT
PREV
特徴・独自性
  • Angiogenesis, i.e., the formation of new capillaries, takes place under pathophysiological conditions including cancers, ocular neovascular diseases and atherosclerosis. Anti-angiogenic drugs have been developed, and are now in clinical use. However, because of side effects due to the damage to vascular endothelial cells, the development of anti-angiogenic drugs with different modalities is anticipated. We have isolated vasohibin-1 (VASH1) as a novel angiogenesis inhibitor expressed by endothelial cells (ECs), and vasohibin-2 (VASH2) as its homologue having pro-angiogenic activity.
実用化イメージ

We are planning to develop strategies of VASH1 potentiation and VASH2 inhibition. For VASH1 potentiation, we are planning to use recombinant VASH1 protein or search low molecular weight substances having VASH1 like activity. For VASH2 inhibition, we are succeeded in the development of neutralizing anti-human VASH2 monoclonal antibody.

Researchers

New Industry Creation Hatchery Center

Yasufumi Sato

[Oil film breakage]

newDevelopment of a Numerical Prediction System for Sliding Part Wear and Seizure Occurrence Portions

NEXT
PREV
概要

Focusing on the lubricant film flow with phase change between the engine piston pin and connecting rod small end, we developed a new multiphase fluid-structure coupled analysis method that takes into account elastic deformation of the structure and flow path changes and developed a simulation prediction method for tribological properties under high load conditions. The simulation prediction method for tribological properties under high load conditions has been created. As a result, we succeeded in simulation prediction of the wear/seizure generating areas in sliding parts. We discovered that the peculiar deformation behavior of the components is the cause of wear/seizure.

従来技術との比較

It has been thought that computational prediction is impossible to verify the wear and seizure locations in fluid lubrication. Still, this study succeeded in the simulation prediction of wear and seizure locations in sliding parts.

特徴・独自性
  • Numerical prediction of the wear and seizure locations in the sliding parts of engine piston pins was successfully performed.
  • The bow-like deformation of the piston pin was identified as the cause of mechanical contact and seizure at the connecting rod edge.
  • A three-dimensional multiphase fluid-structure coupled analysis method has been successfully developed, considering the piston pin's elastic deformation and connecting rod and thin-film cavitation1 lubrication with unsteady flow path changes.
実用化イメージ

This research method applies to automotive engines and all sliding component elements using fluid lubrication. It contributes to damage prediction and the development of safety guidelines for transportation and industrial machinery components, enabling the optimal design of components.

Researchers

Institute of Fluid Science

Jun Ishimoto

[Okadaic Acid]

Development of a Novel Quantification Method for Diarrhetic Schell Fish Poisoning

特徴・独自性
  • We have investigated isolation and structure determination of natural products and evaluated mode of their actions. We have especially focused on marine natural products causative for a food poisoning, diarrheic shellfish poisoning (DSP), which has spread worldwide and threatened regional fishery industry. Dinophysistoxin produced by the dinoflagellate Dinophysis spp. and okadaic acid, are thought to be responsible for DSP. Acute toxicity test using mice has been the primary method for detection of DSP in the fish market, though an alternative method to quantify DSP without sacrificing mice has been requested. We isolated OABP2, a novel okadaic acid binding protein, from the marine sponge Halichondria okadai and succeeded in expression of the recombinant OABP2 in E. coli, which eventually showed high affinity to the DSP toxins.
実用化イメージ

We are now working on visualization of OA by utilizing OABP2 in order to provide an easy and quick quantification method for DSP.

Researchers

Graduate School of Agricultural Science

Keiichi Konoki

[oligonucleotide therapeutics]

Creation of cancer cell specific oligonucleotide therapeutics

NEXT
PREV
特徴・独自性
  • Focusing our reseach interest mostly on the recognition and complexation behavior control of bioplymrs, such as DNA/RNA, proteines and so on. Another topics are reaction control based on molecular recognition phenomena in both ground and electronically excited states, we are pursuing mechanistic and synthetic studies on asymmetric photochemistry with supramolecular biopolymers as chiral reaction fields.
実用化イメージ

Researchers

Institute of Multidisciplinary Research for Advanced Materials

Takehiko Wada

[olihonucleotide]

Development of Intelligent Molecules for the Regulation of Gene Expression in Cells

NEXT
PREV
特徴・独自性
  • The artificial control of gene expression by synthetic oligodeoxynucleotides (ODNs) has been the subject of considerable interest. In particular, ODNs conjugated with a cross-linking agent have been expected to enhance the inhibitory effect. Recently, microRNAs (miRNA) endogenously expressed small regulatory non-coding RNAs, are recognized as playing a critical role in regulating gene expression and the great concerns have been raised about efficient antisense oligonucleotides against miRNAs. We have already demonstrated that ODNs bearing a 2-amino-6-vinylpurine (2-AVP) derivative exhibited efficient interstrand cross-linking to cytosine selectively. The unique structural features of AVP are to possess both the hydrogen bond donor-acceptor sites as recognition sites and the vinyl group as a reactive moiety in a single molecule. Recently, we have developed of the novel cross-linking agents, which are designed based on the unique structure of AVP. These derivatives can react to thymine at the complementary site with highly selective and efficient under neutral conditions. We hope to conduct collaborative research with a willing company for a practical application of this technology in industry.
実用化イメージ

Researchers

Institute of Multidisciplinary Research for Advanced Materials

Fumi Nagatsugi

[Oncogenesis]

Elucidation of oncogenesis by Fbxw7

NEXT
PREV
特徴・独自性
  • In life science research field, it is noteworthy issue how information in genome is interpreted and is transferred to functional molecules. However, during these 10 years, we convinced that the amount of proteins, final functional molecules was regulated by not only by production but also by degradation. For examples, the amount of c-Myc, which promotes cell cycle and inhibits cell death, increase in many types of cancer by failure of protein degradation.
  • We have generated model mice in which function of Fbxw7, inducer of c-Myc degradation is suppressed. We observed promotion of oncogenesis in these mice, suggesting that Fbxw7 is oncosuppressor gene. In other words, Fbxw7 has a great potential to regulate oncogenesis or progress of cancer. These molecules specified the target proteins for proteolysis suggesting that modification of these molecules leads to develop oncosuppressive therapy. We hope to conduct collaborative research with a willing company for a practical application of this knowledge in industry.
実用化イメージ

Researchers

Graduate School of Medicine

Keiko Nakayama

[online assembly]

Digitizing Democracy in Japan

NEXT
PREV
特徴・独自性
  • The global pandemic is forcing democracies around the world to hold non-contact elections. Internet voting is considered a viable option, but there is little chance of introducing it in Japan. Similarly, while there is an urgent need to implement online parliament to reduce the risk of infection, only a minority of parliaments are willing to do so. In this study, we will identify the factors that hinder the digitalization of democracy and pursue the possibility of social implementation in Japan.
実用化イメージ

This study can contribute to election commission practices and vendor voting terminal development.

Researchers

Graduate School of Information Sciences

KAWAMURA Kazunori

[opinion/information analysis]

Natural Language Processing for Semantic Analysis of Big Data

NEXT
PREV
特徴・独自性
  • This lab conducts fundamental research for deep natural language processing (NLP) and NLP-oriented information organization such as classification, extraction, and summarization of language information. Our activities also cover a broad range of applied research including NLP-based information and knowledge mining, information credibility analysis, and resilient ICT through the maximal use of Big Data.
実用化イメージ

(i) Analysis of market trend or research trend through intelligent text mining, (ii) Discovery of potential needs and risks from opinions in social media, (iii) Management of knowledge in a company by analyzing internal documents, etc.

Researchers

Center for Language AI Research

Kentaro Inui

[optical biopsy]

Development of Optical Sysytems for Noninvasive Treatment and Diagnosis

NEXT
PREV
特徴・独自性
  • Optical fiber-based endoscopic systems for non-invasive treatment and diagnosis are developed. The fiber transmits high-powered laser light for treatment and low-powered light for diagnosis. We develop treatment and diagnosis systems utilizing not only common glass-based optical fibers but hollow-optical fibers. Hollow optical fibers deliver high-powered infrared lasers and light with wide range of wavelength from ultraviolet and far infrared.
実用化イメージ

Our potential collaborators will be medical device manufactures, as well as any electronic device, communication device, and measurement instrument manufactures considering new entry to the field.

Researchers

Graduate School of Biomedical Engineering

Yuji Matsuura

[optical communications systems]

R&D in Semiconductor Materials and their Device Applications Bringing System Evolutions

NEXT
PREV
特徴・独自性
  • 1. Development of Distributed Feedback (DFB) Laser Diodes (LD) widely used in optical communications systems realizing a highly information-based society. This LD increases the transmission capacity by 25,000 times per fiber which means the bit rate of 10Tb/s.
  • 2. Nitride semiconductors famous for blue light emitting diodes.
  • (a) Proposal of InGaAlN system considering device applications in 1989
  • (b) Success in growth of single crystalline InGaN by metalorganic vapor phase epitaxy (MOVPE) in 1989
  • (c) Prediction of band-gap energy (Eg) of InN much smaller than the values reported in 1980s and its   experimental confirmation in 2002
  • (d) Observation of photoluminescence from InGaN in 1991
  • (e) Prediction of phase separation in InGaAlN in 1997
実用化イメージ

DFB-LD: Fabrication of periodic structure with submicron scale, Epitaxial growth of semiconductor films on the substrate with fine structures, LD fabrication process, device evaluation, and device simulation

Nitride Semiconductors: MOVPE growth, N-polar growth, Evaluation of semiconductor materials, Fabrication of light-emitting devices, solar cells, and high-power transistors

Researchers

New Industry Creation Hatchery Center

Takashi Matsuoka

[Optical Devices]

Development of Miniature and Highly-Functional Photonic Devices Using Ultrafine Microstructures

NEXT
PREV
特徴・独自性
  • In our laboratory, miniature and highly-functional photonic devices based on new optical phenomena caused by the interaction of ultrafine microstructures with light have been studied. In addition, development of new production technology to overcome the problems that have been obvious from the practical application viewpoint of nanophotonic devices has been performed.
    • -Main research topics--
    MEMS tunable metamaterials for optical control.
  • Structural color filters using subwavelength gratings for the applications of display and spectroscopic analyzers.
  • Surface-smoothing technology using surface self-diffusion.
  • Study of low loss silicon nanophotonic devices.
実用化イメージ

We aim to realize optical filters, optical resonators, and color filters, by using above technologies. Also, development of nano-photonic elements fabricated by a nanoimprint technology has been progressed.
We hope to conduct collaborative research with a willing company for a practical application of this technology in industry.

Researchers

Graduate School of Engineering

Yoshiaki Kanamori

[optical element]

Hands-On Access Fabrication Facility –Open Facility for MEMS and Semiconductor Prototyping–

NEXT
PREV
NEXT
PREV
概要

We offer shared facility for the development of semiconductor prototypes equipped with 4-inch, 6-inch and some 8-inch wafer fabrication tools available on an hourly basis. Know-how accumulated at Tohoku University is available, and staff provide maximum support for prototyping. The service is performed at the 1,200 m2 Super Clean Room on the second floor of the Junichi Nishizawa Memorial Research Centre at Tohoku University. For information on equipment and fees, see our website.

従来技術との比較

More than 10 experienced technical staff assist customer's usages. Standard process conditions for each process, such as etching and deposition, are provided. allowing customers to start prototyping immediately. Various materials other than silicon can also be supported.

特徴・独自性
  • We support the development of devices and semiconductor materials such as MEMS, optical elements and RF components.
  • Technical consultation on devices and processes before and during prototyping is also available.
  • A
  • 'Prototype lab' for device packaging is also available.
  • The museums where you can learn about the history of semiconductors, measuring instruments and sensors are open.
  • As part of Technology Co-creation for Semiconductor of Tohoku University, we promote R&D of semiconductors and the development of human resources.
  • On-demand semiconductor human resource development programs for students and engineers are available.
  • As a member of the MEXT's Advanced Research Infrastructure for Materials (ARIM) program, we are involved in sharing facility and data.
実用化イメージ

More than 310 companies have used our shared facility since its launch in 2010, not only from device manufacturers such as MEMS, but also from manufacturers of materials, mechanical components and equipment. To date, we have successfully supported the commercialization of about 10 devices.

Researchers

Micro System Integration Center

Kentaro Totsu

[optical fibers]

Development of Optical Sysytems for Noninvasive Treatment and Diagnosis

NEXT
PREV
特徴・独自性
  • Optical fiber-based endoscopic systems for non-invasive treatment and diagnosis are developed. The fiber transmits high-powered laser light for treatment and low-powered light for diagnosis. We develop treatment and diagnosis systems utilizing not only common glass-based optical fibers but hollow-optical fibers. Hollow optical fibers deliver high-powered infrared lasers and light with wide range of wavelength from ultraviolet and far infrared.
実用化イメージ

Our potential collaborators will be medical device manufactures, as well as any electronic device, communication device, and measurement instrument manufactures considering new entry to the field.

Researchers

Graduate School of Biomedical Engineering

Yuji Matsuura

[Optical Filters]

Development of Miniature and Highly-Functional Photonic Devices Using Ultrafine Microstructures

NEXT
PREV
特徴・独自性
  • In our laboratory, miniature and highly-functional photonic devices based on new optical phenomena caused by the interaction of ultrafine microstructures with light have been studied. In addition, development of new production technology to overcome the problems that have been obvious from the practical application viewpoint of nanophotonic devices has been performed.
    • -Main research topics--
    MEMS tunable metamaterials for optical control.
  • Structural color filters using subwavelength gratings for the applications of display and spectroscopic analyzers.
  • Surface-smoothing technology using surface self-diffusion.
  • Study of low loss silicon nanophotonic devices.
実用化イメージ

We aim to realize optical filters, optical resonators, and color filters, by using above technologies. Also, development of nano-photonic elements fabricated by a nanoimprint technology has been progressed.
We hope to conduct collaborative research with a willing company for a practical application of this technology in industry.

Researchers

Graduate School of Engineering

Yoshiaki Kanamori

[Optical MEMS]

Design and Fabrication of Micro-Optical Devices Based on Optics, Especially Optical MEMS and Sensors

NEXT
PREV
特徴・独自性
  • On the basis of optical engineering, optical technologies for sensing mechanical motion, spectroscopic properties, and other physical/chemical characteristics are investigated. Moreover, using semiconductor micro/nano-fabrication technology, integrated micro-optical sensors, micro/nano optical systems, optical micro-electro-mechanical systems (MEMS) are studied. Micro laser scanner for display, deformable mirror for telescope, optical displacement encoder, and fluorescent analysis system are the examples of research topics.
実用化イメージ

Optical design, Optical industries, Industries relating to semiconductor micro fabrication and MEMS, optical telecommunications, etc.

Researchers

New Industry Creation Hatchery Center

Kazuhiro Hane

[Optical sensor]

Development of Sensors and Measuring Systems for Ultra-Precision Manufacturing and Nanomanufacturing

NEXT
PREV
特徴・独自性
  • The research is being focused on measurement of surface forms of precision workpieces and stage motions of precision machines, which are important items for ultra-precision manufacturing and nanomanufacturing. Optical sensors are being developed for measurement of angle and displacement, which are fundamental quantities for manufacturing. Technologies for improvement of the sensor sensitivity and bandwidth, reduction of the sensor size as well as new multi-axis sensing methods are being The research is being focused on measurement of surface forms of precision workpieces and stage motions of precision machines. Optical sensors are being developed for measurement of angle and displacement. A number of scanning-type measuring systems for precision measurement of surface forms and stage motions are also being developed. Error separation algorithms and systems for straightness and roundness, which are the most fundamental geometries treated in ultra-precision manufacturing, are being investigated. Novel systems based on scanning probe microscopy are under development for micro- and nano-structures as well as freeform optics in responding to new and important challenges from ultra-precision manufacturing and nanomanufacturing.
実用化イメージ

The multi-axis optical displacement and angle sensors developed in the laboratory are expected to measure motions of semiconductor/IC manufacturing and inspection equipment, precision machine tools, ultra-precision measuring instrument. The surface profile measurement systems are expected t play an important role in ultra-precision manufacturing and nanomanufacturing industries.

Researchers

Graduate School of Engineering

I Ko